Disassembling the LoftyFiber Band Loom

Taking the Loom Apart

Step 1: Untwist the knob on the tension assembly. If your project is still on your loom, hold the other knob firmly and be careful not to let the hollow dowel slide out of place. If you have a tablet woven band in progress on your loom, make sure to secure the tablets with a rubber band before loosening the tension assembly.

Step 2: With the loom lying flat and the left side down, remove the right side of the loom. Start by gently pulling up on each corner creating small separations between the right side of the loom and the dowels. Repeat with the remaining pegs. Once you’ve loosened all of the pegs, lift the right side of the loom off.

Step 3: Disassemble the remaining pieces in the opposite order they were assembled. The first piece to be removed from the square should be the piece highlighted in yellow in the diagrams in the document Assembling the LoftyFiber Band Loom

The beginning of step 2 is shown. You can also push up with your fist if using your thumb is uncomfortable.